Epson DFX-9000 - Manual (Page 35)

Paper Handling 35
2
2
2
2
2
2
2
2
2
2
2
2
Adjusting the tear-off position
If the paper’s perforation is not aligned with the tear-off edge,
follow these steps:
1. Turn on the printer and select the desired tractor.
2. Open the paper separator cover (the flap on the top part of the
printer’s top cover). This exposes the printer’s tear-off edge.
3. Press the Tear Off button to enter the tear-off mode. The Tear
Off light comes on and the printer feeds the paper’s
perforation to the printer’s tear-off edge.