Epson DFX-9000 - Manual (Page 101)

Control Panel 101
4
4
4
4
4
4
4
4
4
4
4
4
Changing the printer’s settings
Changing the settings in the SelecType mode
The following table shows the basic function of each button in the
SelecType mode.
Follow these steps to enter the SelecType mode and change the
settings:
Note:
If you turn off the printer prior to exiting the SelecType mode, any
changes you may have made are canceled and not saved.
1. Make sure paper is loaded.
2. Press the Menu (Tear Off and Top of Form) buttons to enter
the SelecType mode.The LCD displays the selected language
for this mode.
3. If the language you want is not selected, press the SetU (Tear
Off) or SetD (Top of Form) button until the LCD displays the
language you want.
4. Press the ItemD (Pitch) button to set the desired language.
Button Basic function
Menu (Tear Off and Top
of Form) buttons Enters or exits the SelecType mode.
ItemU (Font) button Selects the previous menu parameter.
ItemD (Pitch) button Selects the next menu parameter.
SetU (Tear Off) button Select the previous value in the selected menu.
SetD (Top of Form)
button Select the next value in the selected menu.