Epson DFX-9000 - Manual (Page 122)

122 Problem Solver
Lines of dots are missing in the printout.
Cause What to do
The print head is damaged. Stop printing and contact your dealer to
have the print head replaced.
c
Caution:
Never replace the print head yourself; you may damage the printer. Also,
other parts of the printer must be checked when the print head is replaced.
All the text is printed on the same line.
Cause What to do
No line feed command is sent
at the end of each line of text. Turn on the auto line feed setting using
the printer’s default-setting mode so
that the printer automatically adds a line
feed code to each carriage return. See
“Changing the settings in the SelecType
mode” on page 101 for details.
The printout has extra blank lines between lines of text.
Cause What to do
Two line feed commands are
being sent at the end of each
line of text, because the
printer’s auto line feed setting
is on. Turn off the auto line feed setting using
the printer’s SelecType mode. See
“Changing the settings in the SelecType
mode” on page 101 for details.
The line space setting in your
application software is
incorrect. Adjust the line space setting in your
application software.