Epson DFX-9000 - Manual (Page 143)

Options and Consumables 143
6
6
6
6
6
6
6
6
6
6
6
6
2. Make sure paper is loaded on the front tractor to the
top-of-form position. If paper is already loaded on the tractor
but it is in the standby position, press the Front/Rear or LF/FF
Load button (depending on which tractor is selected) to load
the paper to the top-of-form position. (If no paper is loaded
on the front tractor, load paper. See “Loading Paper onto the
Front Tractor” on page 15 for instructions.)
3. Once you have paper loaded on the printer’s front tractor, use
the LF/FF Load button to advance the paper to the pull tractor.
4. Release both sprocket lock levers on the pull tractor by pulling
them toward you. Then open both sprocket covers.
5. Adjust the sprockets to match the width of your paper.