Epson DFX-9000 - Manual (Page 182)

182 Product Information
Overlapping multi-part forms
Rear entry Front entry
Minimum Maximum Minimum Maximum
Width of
backing
sheet (mm)
(inch)
76.2
3
419.1
16.5
76.2
3
419.1
16.5
Length of
backing
sheet (mm)
(inch)
76.2
3
558.8
22
76.2
3
558.8
22
Total
thickness (mm)
(inch)
0.13
0.0051
0.53
0.021
0.13
0.0051
0.79
0.031
A 13 mm (0.51 inch) or more
B From the perforation to the
bottom of the previous
overlapping form:
13.3 mm (0.52 inch) or less
C From the perforation to the top
of the next overlapping form:
3.3 mm (0.13 inch) or more
D From the perforation to the
bottom edge of the glue point
area:
17 mm (0.67 inch) or less
E Total thickness including glue
point dilation:
0.53 mm (0.021 inch) or less
(Rear Entry)
0.79 mm (0.031 inch) or less
(Front Entry)