Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 57)

Messages Cause/What to do
CA Certificate 1 is not entered. Cause:
CA certificate 1 is not entered and only CA certificate 2 is entered.
What to do:
Import CA certificate 1 first.
Invalid value below. Cause:
Unsupported characters are contained in the file path and/or password.
What to do:
Make sure that the characters are entered correctly for the item.
Invalid date and time. Cause:
Date and time for the printer have not been set.
What to do:
Set date and time using Web Config, EpsonNet Config or the printer's control
panel.
Invalid password. Cause:
The password set for CA certificate and entered password do not match.
What to do:
Enter the correct password.
Invalid file. Cause:
You are not importing a certificate file in X509 format.
What to do:
Make sure that you are selecting the correct certificate sent by a trusted certificate
authority.
Cause:
The file you have imported is too large. The maximum file size is 5KB.
What to do:
If you select the correct file, the certificate might be corrupted or fabricated.
Cause:
The chain contained in the certificate is invalid.
What to do:
For more information on the certificate, see the website of the certificate
authority.
Cannot use the Server Certificates that
include more than three CA
certificates. Cause:
The certificate file in PKCS#12 format contains more than 3 CA certificates.
What to do:
Import each certificate as converting from PKCS#12 format to PEM format, or
import the certificate file in PKCS#12 format that contains up to 2 CA certificates.
Administrator's Guide
Solving Problems
57