Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 46)

Mail Server Setting Items
Items Settings and Explanation
Authentication Method Specify the authentication method for the printer to access the mail server.
Off Authentication is disabled when communicating with a mail
server.
SMTP AUTH Requires that a mail server supports SMTP Authentication.
POP before SMTP Configure the POP3 server when selecting this method.
Authenticated Account If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the
authenticated account name between 0 and 30 characters in ASCII (0x20-0x7E).
Authenticated Password If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the
authenticated password between 0 and 20 characters using A-Z a-z 0-9 ! # $ % & ' * + - . / = ?
^ _ { | } ~ @.
Sender's Email Address Enter the sender’s email address. Enter between 0 and 255 characters in ASCII (0x20-0x7E)
except for : ( ) < > [ ] ; ¥. A period "." cannot be the first character.
SMTP Server Address Enter between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN format.
SMTP Server Port Number Enter a number between 1 and 65535.
POP3 Server Address If you select POP before SMTP as the Authentication Method, enter the POP3 server
address between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN
format.
POP3 Server Port Number If you select POP before SMTP as the Authentication Method, enter a number between 1
and 65535.
Administrator's Guide
Configuring Scan and Fax Destination
46