Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 23)

Setting of Remote
Address(Host) IPv4*1
✓
–
✓
IPv6*1*2 –
✓ ✓
Blank ✓ ✓ ✓
*1If IPsec is selected for Access Control, you cannot specify in a prefix length.
*2If IPsec is selected for Access Control, you can select a link-local address (fe80::) but group policy will be disabled.
*3Except IPv6 link local addresses.
References of Service Name on Group Policy
Service Name Protocol type Local port
number
Remote port
number
Features controlled
Any – – – All services
ENPC UDP 3289 Any port Searching for a printer from
applications such as EpsonNet Config,
a printer driver and the a scanner
driver
SNMP UDP 161 Any port Acquiring and configuring of MIB from
applications such as EpsonNet Config,
the Epson printer driver and the Epson
scanner driver
LPR TCP 515 Any port Forwarding LPR data
RAW (Port9100) TCP 9100 Any port Forwarding RAW data
IPP/IPPS TCP 631 Any port Forwarding AirPrint data (IPP/IPPS
printing)
WSD TCP Any port 5357 Controlling WSD
WS-Discovery UDP 3702 Any port Searching for a printer from WSD
Network Scan TCP 1865 Any port Forwarding scan data from Document
Capture Pro
Network Push
Scan TCP Any port 2968 Acquiring job information of push
scanning from Document Capture Pro
Network Push
Scan Discovery UDP 2968 Any port Searching for a computer when push
scanning from Document Capture Pro
is executed
FTP Data (Local) TCP 20 Any port FTP server (forwarding data of FTP
printing)
FTP Control
(Local) TCP 21 Any port FTP server (controlling FTP printing)
FTP Data
(Remote) TCP Any port 20 FTP client (forwarding scan data and
received fax data)
However this can control only an FTP
server that uses remote port number
20.
Administrator's Guide
Using the Printer in a Secure Network
23