Configuration examples of ipsec/ip filtering – Epson WorkForce Pro WF-R8590 DTWF User Manual

Page 24

Service Name

Protocol type

Local port

number

Remote port

number

Features controlled

FTP Control
(Remote)

TCP

Any port

FTP client (controlling to forward scan
data and received fax data)

CIFS (Local)*

TCP

445

Any port

CIFS server (Sharing a network folder)

CIFS (Remote)*

TCP

Any port

445

CIFS server (forwarding scan data and
received fax data to a folder)

HTTP (Local)

TCP

Any port

HTTP(S) server (forwarding data of
Web Config and WSD)

HTTPS (Local)

TCP

443

Any port

HTTP (Remote)

TCP

Any port

HTTP(S) client (communicating
between Epson Connect or Google
Cloud Print, firmware updating and
root certificate updating)

HTTPS (Remote)

TCP

Any port

443

*If you want to control features forwarding scan data and received fax data, sharing a network folder or receiving fax from PC-

FAX, change the setting of Method of Choosing Port to Port Number from Service Name, and then specify the port
numbers for CIFS and NetBIOS.

Configuration Examples of IPsec/IP Filtering

Receiving IPsec packets only

This example is to configure a default policy only.

Default Policy

❏ IPsec/IP Filtering: Enable
❏ Access Control: IPsec
❏ Authentication Method: Pre-Shared Key
❏ Pre-Shared Key: Enter up to 127 characters.

Group Policy

Do not configure.

Receiving printing data and printer settings

This example allows communications of printing data and printer configuration from specified services.

Default Policy

❏ IPsec/IP Filtering: Enable
❏ Access Control: Refuse Access

Group Policy

❏ Enable this Group Policy: Check the box.
❏ Access Control: Permit Access
❏ Remote Address(Host): IP address of a client
❏ Method of Choosing Port: Service Name
❏ Service Name: Check the box of ENPC, SNMP, HTTP (Local), HTTPS (Local) and RAW (Port9100).

Administrator's Guide

Using the Printer in a Secure Network