Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 28)

IEEE802.1X Network Setting Items
Items Settings and Explanation
IEEE802.1X (Wired LAN) You can enable or disable settings of the page (IEEE802.1X > Basic) for IEEE802.1X (Wired
LAN).
IEEE802.1X (Wi-Fi) The connection status of IEEE802.1X (Wi-Fi) is displayed.
Connection Method The connection method of a current network is displayed.
EAP Type Select an option for an authentication method between the printer and a RADIUS server.
EAP-TLS You need to obtain and import a CA-signed certificate.
PEAP-TLS
PEAP/MSCHAPv2 You need to configure a password.
User ID Configure an ID to use for an authentication of a RADIUS server.
Password Configure a password to authenticate the printer.
Confirm Password Enter the password you configured for confirmation.
Server ID You can configure a server ID to authenticate with a specified RADIUS server. Authenticator
verifies whether a server ID is contained in the subject/subjectAltName field of a server
certificate that is sent from a RADIUS server or not.
Anonymous Name If you select PEAP-TLS or PEAP/MSCHAPv2 for Authentication Method, you can configure
an anonymous name instead of a user ID for a phase 1 of a PEAP authentication.
Encryption Strength You can select one of the followings.
High AES256/3DES
Middle AES256/3DES/AES128/RC4
Administrator's Guide
Using the Printer in a Secure Network
28