Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 25)

Receiving access from a specified IP address only
This example allows a specified IP address to access the printer.
Default Policy :
❏ IPsec/IP Filtering: Enable
❏ Access Control:Refuse Access
Group Policy :
❏ Enable this Group Policy: Check the box.
❏ Access Control: Permit Access
❏ Remote Address(Host): IP address of an administrator’s client
Note:
Regardless of policy configuration, the client will be able to access and configure the printer.
Configuring a Certificate for IPsec/IP Filtering
1. Access the printer's Web Config and select Network Security Settings > IPsec/IP Filtering > Certificate.
2. Specify a certificate to use on Use the following CA Certificate.
You can specify an imported certificate for other features.
3. Specify a certificate to use on Use the following Client Certificate.
You can specify an imported certificate for other features.
4. Click Next.
A confirmation message is displayed.
5. Click OK.
The printer is updated.
Administrator's Guide
Using the Printer in a Secure Network
25