Epson Digitial Camera - Manual (Page 66)

Using Optional Accessories A-3
B
A
4 Position the module so that the notch is aligned with the rounded
corner of the socket.
5 Slide the module into the socket at an angle as shown, pressing
along the edge until it clicks into place.
6 Press down on the module until it snaps into the retaining clips at
the sides of the socket.
7 Place the socket cover on the camera body and press down until it
snaps into place.
8 Replace the batteries in the battery compartment and replace the
battery cover as described on page 1-3.
When you take your next picture, the pictures remaining number on the
control panel shows your camera’s expanded capacity.
With expanded memory, you may notice a delay between the time you
press the shutter button and when the camera beeps. You can reduce this
delay by pressing the button down halfway, holding it until you’re ready
to take the picture, and then pressing it down the rest of the way.
notch
rounded corner
retaining clip