Epson Digitial Camera - Manual (Page 28)

Using PhotoPC with Your Macintosh 3-1
B
3
hen you’re finished taking pictures, you can
connect the camera to your Macintosh and transfer the images.
Then you can use them in your letters, presentations, or just about
anything you create on your Macintosh. This chapter tells you how,
including:
❙ Connecting PhotoPC to your Macintosh
❙ Transferring pictures to your Macintosh
❙ Erasing pictures from the camera
❙ Using pictures in your documents
❙ Closing EasyPhoto.
3 Using PhotoPC with Your Macintosh
W Connecting PhotoPC to Your Macintosh
If you have the PhotoPC Mac Version, you’ll use the cable with the Mac
adapter to connect the camera to your Macintosh. If you have the Mac
Connectivity Kit, you’ll use the cable that came in the kit.
If you have the optional AC adapter, you can save on batteries by using
the adapter whenever you connect the camera to your Macintosh.
The universal AC adapter should be available where you bought your
PhotoPC. If not, you can order an AC adapter by calling EPSON
Accessories at (800) 873-7766 (U.S. sales only). In Canada, call
(800) GO-EPSON.
Follow these steps to connect the camera:
1 Make sure the camera is finished processing (the green standby
light is not flashing). Turn off the camera and shut down and turn
off your Macintosh.