Epson Endeavor - Manual (Page 45)

How to Use This Chapter
This chapter explains how to do the following:
Remove the computer’s cover
Change jumper settings on the main system board
Install (and remove) memory modules (SIMMs)
Install an option card
Remove an option card
Remove the option card connector board (to access the
main system board)
Replace the option card connector board
Install a new processor chip (CPU)
Increase the video memory
Use the alternate VGA interface (feature connector)
Use a display adapter card
Replace the cover.
Follow the steps in the first section to remove the cover, and
then go to the appropriate section for the instructions you need.
When you finish, see the instructions at the end of this chapter
to replace the computer’s cover.
2-2 Installing and Removing Options