beautypg.com

Epson Endeavor User Manual

Page 105

background image

If you removed one hard disk drive and are leaving another

one in the computer, you need to set the jumpers on the

remaining drive to indicate that you now have only one

hard disk drive. See the documentation that came with the

drive for the correct jumper settings.

7. If you removed a diskette drive from the lower bay and you

are leaving the bay empty or installing a hard disk drive in

it, you need to replace the front panel faceplate to cover the

bay. Secure the faceplate to the inside of the computer’s

cover with the two screws, as shown below.

3-32

Installing and Removing Drives