Emerson Process Management Bristol ControlWave ExpressPAC - Manual (Page 19)

ControlWave ExpressPAC Instruction Manual (CI-ControlWave EPAC)
Revised Mar-2011 Installation 2-5
Figure 2-2. ControlWave ExpressPAC NEMA 3R Enclosure Dimensions
 Mount the unit to a panel, a wall or to a vertical 2 inch pipe clamped
at the rear of the unit using two clamps and four bolts. See Figure 2-
4 and Figure 2-5. If you mount to a pipe, it must be anchored in
cement deep enough to conform to local building codes associated
with frost considerations.