Enterasys Networks 5H1XX - Manual (Page 94)

Configuring Static Unicast Addresses
7-34 Device Control Menu Screens
7.16 CONFIGURING STATIC UNICAST ADDRESSES
Use the Static Unicast Address Table Configuration screen ( Figure 7-21 ) to manually configure
host MAC addresses in the unicast table. You can use this screen to associate a MAC address with
a specific VLAN ID and switch port.
You can also lock a port to a particular MAC Address or the first MAC address received by the port
to prevent other users (MAC Addresses) from using that port. When a port is locked, broadcast and
multicast packets are processed over the link as well as the locked MAC address packets.
Figure 7-21 Static Unicast Address Table Configuration Screen
Parameter Description
VID The VLAN group to which this port is assigned.
MAC Address The MAC address of a host device attached to this switch.
Port The port to which the host device is attached.
VID MAC Address Port Status
------------------------------------------------------------------------------------------------------
VID : 1 MAC : 00-00-00-00-00-00
MAC : 00-00-00-00-00-00 Port : 1 Status : Permanent
[Show] [More] [Set]
3583_41