Enterasys Networks 5H1XX - Manual (Page 54)

Assigning SNMP Parameters
6-12 Management Setup Menu Screens
6.4.1 Configuring Community Names
The SNMP Communities screen ( Figure 6-8 ) is selected from the SNMP Configuration Menu
screen. The table following the figure describes the fields. This screen is used to configure the
community strings authorized for management access. Up to 5 community names may be entered.
Figure 6-8 SNMP Communities Screen
Parameter Description
Community Name A community entry authorized for management access.
Maximum string length: 20 characters
Access Management access is restricted to Read Only or
Read/Write.
Status Sets administrative status of entry to enabled or disabled.
NOTE: The default community strings are “public” with Read Only access, and “private”
with Read/Write access.
Community Name Access Status
1. public READ/WRITE ENABLED
2.
3.
4.
5.
3583_16