Enterasys Networks 5H1XX - Manual (Page 55)

Assigning SNMP Parameters
Management Setup Menu Screens 6-13
6.4.2 Configuring IP Trap Managers
The IP Trap Managers screen ( Figure 6-9 ) is selected from the SNMP Configuration Menu screen.
The table following the figure describes the fields. This screen is used to specify the management
stations that will receive authentication failure messages or other trap messages from the switch.
Up to 5 trap managers may be entered.
Figure 6-9 IP Trap Managers Screen
Parameter Description
IP Address IP address of the trap manager.
Community Name A community specified for trap management access.
Status Sets administrative status of selected entry to ENABLED or
DISABLED.
IP Address Community Name Status
1. 0.0.0.0 public DISABLED
2. 0.0.0.0 public DISABLED
3. 0.0.0.0 public DISABLED
4. 0.0.0.0 public DISABLED
5. 0.0.0.0 public DISABLED
3583_17