Enterasys Networks 5H1XX - Manual (Page 51)

Configuring the Serial Port
Management Setup Menu Screens 6-9
Parameter Default Description
Management
Mode CONSOLE
MODE Indicates that the console port settings are for direct
console connection.
Baud rate 9600 The rate at which data is sent between devices.
Options: 2400, 4800, 9600, and 19200 bps.
Data bits 8 bits Sets the data bits of the RS232 port.
Options: 7, 8
Stop bits 1 bit Sets the stop bits of the RS232 port.
Options: 1, 2
Parity NONE Sets the parity of the RS232 port.
Options: none/odd/even
Time-Out
(in minutes) 10 If no input is received from the attached device after this
interval, the current session is automatically closed.
Range: 0-100 minutes; 0: disabled
Auto Refresh
(in seconds) 5 Sets the interval before a console session will auto refresh
the console information, such as Spanning Tree
Information, Port Configuration, Port Statistics, and
RMON Statistics.
Range: 5-255 seconds; 0: disabled