2 configuring port parameters, Configuring port parameters -4, Port configuration screen – Enterasys Networks 5H1XX User Manual
Page 64: Port configuration, Section 7.2
Configuring Port Parameters
7-4
Device Control Menu Screens
7.2
CONFIGURING PORT PARAMETERS
Use the Port Configuration screen (
) to set or display communication parameters for any
port or module on the switch.
Figure 7-2
Port Configuration Screen
Port Configuration
: Port 1 - 12
Flow Control mode of all ports :
[Enable]
[Disable]
Port Type Admin Flow Control Speed and Duplex
--------------------------------------------------------------------------------
1 10/100TX ENABLED ENABLED AUTO
2 10/100TX ENABLED ENABLED AUTO
3 10/100TX ENABLED ENABLED AUTO
4 10/100TX ENABLED ENABLED AUTO
5 10/100TX ENABLED ENABLED AUTO
6 10/100TX ENABLED ENABLED AUTO
7 10/100TX ENABLED ENABLED AUTO
8 10/100TX ENABLED ENABLED AUTO
9 10/100TX ENABLED ENABLED AUTO
10 10/100TX ENABLED ENABLED AUTO
11 10/100TX ENABLED ENABLED AUTO
12 10/100TX ENABLED ENABLED AUTO
3583_22