Enterasys Networks 5H1XX - Manual (Page 63)

Configuring the Switch
Device Control Menu Screens 7-3
IGMP Configuration Configures IGMP multicast filtering. For details, refer to
Section 7.8 .
Extended Bridge Configuration Displays/configures extended bridge capabilities provided
by this switch, including support for traffic classes, and
VLAN extensions. For details, refer to
Section 7.9 .
802.1P Configuration Used to configure the default port priorities and queue
assignments for each port, or to display the mapping for the
traffic classes. For details, refer to
Section 7.10 .
802.1Q VLAN Base Information Displays basic VLAN information, such as VLAN version
number and maximum VLANs supported. For details, refer
to
Section 7.11 and Section 7.12 .
802.1Q VLAN Current Table
Information Displays VLAN groups and port members. For details,
refer to
Section 7.13 .
802.1Q VLAN Static Table
Configuration Configures VLAN groups via static assignments, including
setting port members. For details, refer to
Section 7.14 .
802.1Q VLAN Port
Configuration Displays/configures port-specific VLAN settings, including
PVID, and ingress filtering. For details, refer to
Section 7.15 .
Static Unicast Address Table
Configuration Allows you to display or configure static unicast addresses.
For details, refer to
Section 7.16 .
Selection Description