Enterasys Networks 5H1XX - Manual (Page 49)

Changing the Network Configuration
Management Setup Menu Screens 6-7
6.2.3 HTTP Configuration
Use the HTTP Configuration screen ( Figure 6-5 ) to enable/disable the on-board Web agent, and to
specify the TCP port that will provide HTTP service. The screen shown below is described in the
following table.
Figure 6-5 HTTP Configuration Screen
Parameter Description
HTTP Server Enables/disables access to the on-board web agent for
WebView.
HTTP Port Number Specifies the TCP port that will provide HTTP service.
Range: 0~65535
Default: Port 80
(Telnet Port 23 is prohibited.)
HTTP Server : ENABLED
HTTP Port Number : 80
3583_13