Enterasys Networks 5H1XX - Manual (Page 37)

Main Menu
Main Menu Screens 4-3
Management Setup Menu (For details, refer to Chapter 6 .)
Network Configuration
Menu
Serial Port Configuration
SNMP Configuration
Menu
Console Login
Configuration
TFTP Download
Includes IP setup, Ping facility, HTTP (Web Agent) setup, Telnet
configuration, and MAC address.
Sets communication parameters for the serial port, including
management mode, baud rate, console time-out, and screen data
refresh interval.
Activates traps and configures communities and trap managers.
Sets user names and passwords for system access, as well as the
invalid password threshold and lockout time.
Downloads new version of firmware to update your system
(in-band).
Device Control Menu (For details, refer to Chapter 7 .)
Port Configuration
Port Information
Spanning Tree
Configuration
Spanning Tree
Information
Mirror Port Configuration
SmartTrunking
Configuration
IGMP Configuration
Enables any port, enables/disables flow control, and sets
communication mode to auto-negotiation, full duplex or half
duplex.
Displays operational status, including link state, flow control
method, and duplex mode.
Enables Spanning Tree Algorithm; also sets parameters for hello
time, maximum message age, switch priority, and forward delay;
as well as port priority and path cost.
Displays full listing of parameters for the Spanning Tree
Algorithm.
Sets the source and target ports for mirroring.
Specifies ports to group into aggregate trunks.
Configures IGMP multicast filtering.
Selection Description