Enterasys Networks 5H1XX - Manual (Page 80)

Configuring SmartTrunks
7-20 Device Control Menu Screens
Use the Smart Trunking Configuration screen ( Figure 7-11 ) to set up port trunks.
Figure 7-11 SmartTrunking Configuration Screen
Parameter Description
SmartTrunk Group Read only field that indicates the SmartTrunk Group
number associated with the logical ports listed under
SmartTrunk Logical Port.
SmartTrunk Logical Port Read only field that lists the Logical Ports associated with
the SmartTrunk Group
SmartTrunk Status Used to enable or disable the trunk group
SmartTrunk Group ID Used to select from 1 to 6 trunks. This is the group ID of the
SmartTrunk group. Identifies the chip set to be used. Refer
to
Table 7-1 for the ports associated with each group ID.
Port Lists the valid ports for the chip set selected in the
SmartTrunk Group ID field. Refer to
Table 7-1 for the ports
associated with each group ID.
SmartTrunking Configuration
SmartTrunk Group:
SmartTrunk Logical Port:
Port State
----------------------------
SmartTrunk Status: DISABLED SmartTrunk Protocol: DISABLED
SmartTrunk Group Id:
Port: NO CHANGE
3583_31