Inserting and removing diskettes – Epson EQUITY 386SX/16 PLUS User Manual
Page 67
Inserting and Removing Diskettes
If you have a
diskette drive, insert a diskette as
follows: hold the diskette with the label facing up and the
read/write slot leading into the drive, as shown below.
rite slot
Slide the diskette into the slot until it is in all the way. Then
turn the latch down to lock it in a vertical position. This
keeps the diskette in place and enables the read/write heads
in the drive to access the diskette.
When you want to remove a diskette, first make sure the disk
drive light is off. Then flip up the latch and carefully pull out
the diskette. Place it in its protective envelope and store it in
a proper location, such as a diskette container.
Using Your Computer
3-15