Epson EQUITY 386SX/16 PLUS - Manual (Page 100)

7. Secure the end of the card to the back of the computer
with the retaining screw.
8. Follow the instructions at the end of this chapter to
replace the cover. Then see “Post-installation Setup,”
following that section.
Removing an Option Card
If you need to remove an option card, follow these steps:
1. First, remove the cover from the computer. See page 5-2
for instructions.
2. Remove the screw securing the card to the back of the
computer and pull it straight up and out of the slot.
Either set the card aside by placing it gently on a soft
surface with the component side facing up or carefully
wrap the card, preferably with the original packing
materials, and place it inside its box for safe storage.
3. Cover the option slot opening with the original metal
cover and secure it with the retaining screw.
5-16
Installing and Removing Options