beautypg.com

Epson EQUITY 386SX/16 PLUS User Manual

Page 174

background image

Position the power supply cable connector so that the
notched corners on the connector line up with the
notched corners of the power supply socket on your

drive. Make sure the holes fit over all the pins and then
push in the connector.

notched corners

Caution

If you do not correctly align the holes with the pins,
you could severely damage your drive when you push

in the connector.

If you do not need to reinstall a vertically mounted hard

disk drive, see “Replacing the Subassembly” on page B-46.

If you just connected the power supply cable to your

vertically mounted hard disk drive, perform step 8 again

to connect the power supply cable to the drive you just
installed in the horizontal drive bay. Then see “Replacing

the Drive on the Subassembly” on the next page for

instructions on reinstalling the vertically mounted drive.

B-40

Installing

and Removing Disk Drives