Magnum Energy MM612 Inverter - Manual (Page 9)

©
2010 Magnum Energy, Inc.
2 1
3
4
6
5
8 7
Figure 2, Top Side Features
Standard Features and Benefi ts
The MM Series inverter converts 12 Volts Direct Current (VDC) power
from your battery to 120 Volts Alternating Current (VAC) power. On
models with the multi-stage battery charger feature, the incoming AC
power is optimized using Power Factor Correction (PFC) technology to
keep the inverter’s battery bank fully charged. This inverter is de-
signed to allow easy installation and use and with its die-cast alumi-
num baseplate, which ensures maximum durability and cooler more
effi cient operation.
The inverter is equipped with the following features:
• 600 or 1200 watts continuous (depending on model) at 25° Celsius.
• Numerous protection features to provide a safe and peace-of-mind
operation.
• AC transfer switch circuitry; allowing incoming AC power to continue
to pass-thru to power loads even if the inverter is off.
• Dead battery charging (battery charger models) for charging
batteries that are extremely low.
• Automatic 4-stage battery charger with power factor correction and
temperature compensation – for optimum battery charging (models
with battery charger and using the temperature sensor).
• Modern and aesthetically pleasing design with large AC wiring
compartment (provides easy access to AC wiring for simple and
quick connections) and 360° DC connection terminals with color-
coded insulating covers.
• True RMS output voltage regulation to ensure the inverter will deliver
the correct amount of power – within the DC input voltage range and
the continuous output power level.
• Quick connection accessory and remote ports – easily accepts
several optional remote controls and the Battery Temp. Sensor.
1.0 Introduction
3