Magnum Energy MM612 Inverter - Manual (Page 16)

©
2010 Magnum Energy, Inc. 10
2.0 Installation
Figure 8, MM Series Inverter Dimensions
Mounting holes x 4
[¼” (0.25") diameter ]
10.0"
~ 16 5/8 "
(16.59")
~ 6
3/4
" (6.71")
~ 8
7/16
" (8.41")
~ 7 ½" (7.51")
~ 4
11/16
"
(4.66")
Wiring Guidelines
• Before connecting any wires, determine all wire routes to and from
the inverter throughout the RV or vehicle/boat.
• Conductors passing through walls, bulkheads, or other structural
members must be protected to minimize insulation damage such as
chafi ng, which can be caused by vibration or constant rubbing.
• Always check for existing electrical, plumbing, or other areas of
potential damage prior to making cuts in structural surfaces, bulk-
heads, or walls.
• Make sure all wires have a smooth bend radius and do not become
kinked.
• Both AC and DC overcurrent protection must be provided as part
of the installation.