Magnum Energy MM612 Inverter - Manual (Page 10)

©
2010 Magnum Energy, Inc. 4
1.0 Introduction
1. Inverter Status Indicator - this green light emitting diode (LED)
illuminates to provide information on the inverter’s operation.
2. Power switch - momentary push button switch that turns the
inverter On or Off.
3. Negative DC terminal (black) - the inverter’s connection to the
negative terminal on the 12 VDC battery bank.
4. Positive DC terminal (red) - the inverter’s connection to the
positive terminal on the 12 VDC battery bank.
5. Input circuit breaker - this circuit breaker protects the unit’s
internal wiring and pass-thru relay.
6. Output circuit breaker - this circuit breaker provides another
layer of overload protection. This is not a branch-circuit rated breaker.
Separate AC output breakers are required on the output.
7. Mounting fl anges (x4) - used to secure the inverter to shelf/wall.
8. AC Wiring Compartment - provides access for all AC input and
output connections on the inverter.
Figure 3, Front and Back Side Features
9. Warning and information label - provides pertinent information
for safely using the inverter.
10. REMOTE port connection - a RJ11 connector that allows an
optional remote control to be connected.
11. ACCESSORY PORT connection - a RJ11 connector (only
available for models with the battery charger) to allow the Battery
Temperature Sensor (BTS) or MM accessories (e.g., MM-DCLD) to be
connected. The BTS provides information that enables the multi-stage
PFC battery charger to “fi ne tune” the battery charge voltages.
12. Intake vent - ventilation openings to pull in air to help keep the
inverter cool for peak performance.
13. Exhaust vent - ventilation openings that allow heated air to be
removed by the internal cooling fan.
14. Model/Serial Number label - includes model/serial number and
provides specifi cations and information on the inverter and charger.
See the Specifi cations on page 28 for more information and the dif-
ferent models available.
10
11
12
Front Side
9
Back Side
14
13