Magnum Energy MM612 Inverter - Manual (Page 35)

©
2010 Magnum Energy, Inc.
Appendix A - Remote Control and Monitoring
29
Appendix A - Remote Control and Monitoring
There are several remotes that let you monitor and switch the inverter
on/off from a convenient location. Using the supplied cable with RJ11
connectors, they connect easily to the REMOTE port located on the
front side of the MM Series (see Figure 3, Item 10).
Depending on your inverter model, you can select one of the following
remotes:
MM-R - Provides three LED indicators for inverter status and includes
a remote ON/OFF switch; comes with 25’ cable. This remote is for the
MM Series inverter without the battery charger feature – the MM612
model (requires serial number L1-201 or higher).
MM-RC - Provides six LED indicators for inverter and charger status,
includes a remote ON/OFF switch; comes with 25’ cable. This remote
is for the MM Series inverter with the battery charger feature – the
MM1212 model.
ME-RC50 - Full feature remote with backlit LCD display and LED in-
dicators for inverter and charger status. Provides full menu access for
easy selection and adjustment; comes with 50’ cable. The ME-RC50 is
used for many inverter models and has additional features that are not
functional with the MM Series inverter. However, it can be used with all
MM Series inverter models (MM612 requires serial number L1-201 or
higher).
Using the MM-R and MM-RC Remotes
The MM remotes perform the same function as the ON/OFF switch
on the front of the MM Series inverter, and provides the status of the
different operational modes of the inverter. The appropriate remote
to use depends on whether your inverter includes the battery charger
feature. For MM Series inverters that do not have the battery charger,
the MM-R is the recommended remote; for MM Series inverters that
do have the battery charger, the MM-RC is the recommended remote.
MM-R MM-RC
B ULK
A B S ORB
FA ULT FLOA T
A C IN
INV E RT
ON/OFF
INV E RT
A C IN
FA ULT
ON/ OFF
3 LED’S for
inverter operation
3 additional LED’S
for charger operation
Figure 13, MM Remotes