LW Scientific OmniVID - Manual (Page 9)

recommended to use a big memory SD card.
¾ Play back images and video
In ψPLAYωmode, the recorded images and video can be displayed on the
LCD.
¾ Switch off the camera
To switch off the camera, press the ψPOWERω button for 1second, and
the illumination should also be switched off.
¾ Install and remove the SD memory card
‹ Install the SD card
z Insert the SD card into the slot along the arrow and ‘click’ into
position.
z The camera will sounds and displays an SD card picture,
showing that the SD card is installed properly.
‹ Remove the SD card
z Press the SD card into the slot until you hear a ‘click’ and release,
the SD card can now be removed from the camera.
z The camera will sounds a warning and the SD card shown on the
LCD will disappears.
Notice: SD memory card must be installed before recording. If no SD
card installed, the camera can still display live image, but cannot
record images or video.
8