LW Scientific OmniVID - Manual (Page 24)

¾ Operation Setting
‹ Focus Reference
Focus reference provides a reference number showing how much the
central area of the field of view is in-focused. The bigger value of
focus reference means a better focus. To enable the focus reference
function, click the box under Focus Ref. as shown in the above
figure.
‹ Channel of Color
You can select to enable or disable one or more colors of RGB by
clicking the boxes corresponding to Red, Green, and Blue in
Channel.
‹ Cross line
MicroCap V2.0 provides black and white cross lines respectively,
showing the centre of the previewed field of view.
‹ Quality
You can choose the quality of the recorded images or videos by
pulling down the list and select:
z Best
z Fine
z Normal
‹ Resolution
z To choose the resolution of the recorded images, pull down the
list in Resolution and select the right one. The lowest resolution
is VGA(640x480) pixels and the highest is 10M(3712x2784)
pixels.
z 10M(3712x2784)
z 8M(3264x2448)
z 6M(2816x2112)
z 5M(2592x1944)
z 4M(2304x1728)
z 3M(2048x1536)
23