LW Scientific OmniVID - Manual (Page 16)

Chapter 6. Cable Connection Operations
The digital camera can also be operated with a computer via a USB cable
connection. The image displayed on the LCD of the camera can also be shown
on the screen of a TV or projector by using the video output cable. One of the
interesting features of this camera is that it can be connected directly to a
printer to print out the recorded images without the need of a computer.
Three types of cable connection for the camera
Connection with computers via USB
Connection with TV or projectors via video output
Connection with printers supporting PictBridge
Operations when connected with a computer
When the camera is connected to a computer, the driver of the camera
must be installed, and the camera can be operated using the software
‘MicroCap’. The software can be found on the included CD.
Notice:
The system only supports Windows98, 2000, XP operating system,
but not Vista
When connected with a computer via USB, the camera can be
supported by the power from the USB cable and does not need the
DC power in
Connection operations with USB
Connect the camera and the computer with the USB cable
The LCD will display the two options:
「MicroCap Link」and「Printer
Link
」, wait for 3 seconds, the camera will select「MicroCap Link」
automatically and the connection is completed. You can also select
other options using UP / DOWN / OK buttons
Run the software MicroCap V2.0, you can do the setting, recording
images and videos et al. on the computer
Details about the software MicroCap V2.0 , please go to Chapter 7
Notice:
15