LW Scientific OmniVID - Manual (Page 20)

Main Function of MicroCap V2.0
¾ Camera Setting
‹ Exposure Adjustment
There are two ways to set the exposure time of the camera, which are
the Auto mode and the Manual mode
Left click the Auto rectangle to select the auto mode, and the software
will adjust the exposure and brightness, et al.
When Auto mode is not selected, the values of the exposure and
brightness et al. can be adjusted by using the sliding rod
‹ Brightness Adjustment
When the image shown is too bright or too dark, slide the rod to the
left or right to adjust the brightness.
‹ Contrast Adjustment
19