LW Scientific OmniVID - Manual (Page 12)

„ Press RIGHT button to go to the sub-menu
„ Use UP / DOWN buttons to set the text display on or off and
press OK to confirm
„ Press MENU button again to go back to ψCAMERAω mode
z Brightness ==== Setting the LCD brightness
„ Press MENU button and then RIGHT button once to activate
the setting option
„ Press DOWN button three times, it will display ‘Brightness’
„ Press RIGHT button to go to the sub-menu
„ Use UP / DOWN buttons to change the brightness and press
OK to confirm
„ Press MENU button again to go back to ψCAMERAω mode
z Camera voice ==== Setting the camera voice
„ Press MENU button and then RIGHT button once to activate
the setting option
„ Press DOWN button four times, it will display ‘Voice’
„ Press RIGHT button to go to the sub-menu
„ Use UP / DOWN buttons to set the voice on or off and press
OK to confirm
„ Press MENU button again to go back to ψCAMERAω mode
z Video output ==== Setting the type of video output
„ Press MENU button and then RIGHT button once to activate
the setting option
„ Press DOWN button five times, it will display ‘Video output’
„ Press RIGHT button to go to the sub-menu
„ Use UP / DOWN buttons to choose the type of video output
and press OK to confirm
„ Press MENU button again to go back to ψCAMERAω mode
z Formatting ==== Format the SD memory card
„ Press MENU button and then RIGHT button once to activate
the setting option
„ Press DOWN button six times, it will display ‘Formatting’
„ Press RIGHT button to go to the sub-menu, the memory
card must be inserted into the slot
„ Use UP / DOWN buttons to choose to format or not and
press OK to confirm
„ Press MENU button again to go back to ψCAMERAω mode
z Reset ==== Reset the camera to the factory setting
11