LW Scientific 20L Incubator - Manual

*
*
*
*
Quincy Lab, Inc.
View Setpoint (PRESS)
Increase Setpoint
Decrease Setpoint
(3 sec.) Enter/Exit Menu Leve
ls
Model 12-140E nc ubator
POWER DIGITAL MICROP ROCESSOR
140 SERIES
Switch opening
PAGE 1
General Purpose Incubators
OPERATING MANUAL
I
DIGITAL MICROPR OCESSOR
*
*
*
Quincy Lab, Inc.
View Setpoint (PRESS)
Increase Setpoint
Decrease Setpoint
(3 sec.) Enter/Exit Menu Levels
Model 10-180E nc
ubator I
POWER
Switch opening
140 SERIES
Interior Dimensions
INCHES W x H x D
(CM) W x H x D
Exterior Dimensions
INCHES W x H x D
(CM) W x H x D
12x10x10
13x15x11
Standard Electrical
31x25x25
33x38x28
SPECIFICATIONS
MODEL
ICL-020L-DG71
Common Unit Construction
Exterior: Powder-Coated Steel Interior: Aluminum
Insulation: Fiberglass Door: 140E: Acrylic, 180E: Steel Insulated
Thermo-control: PID Microprocessor Heater: Resistive-Tubular Incoloy
* Standard models voltage only, optional 230 voltage available. Check label on back of unit.
VOLTS / WATTS 115 / 120* 115 / 235* 115 / 270* 115 / 385*
Cubic Foot Capacity .7 ft 3
Common Unit Specifications
Operating Environment: Indoor use, altitude to 6,500 ft. (2,000m) Installation Category II,
Pollution Degree 2, ambient temperature 10 o C/50 o F to 35 o C/95 o F,
80% RH maximum.
Storage Temperature: -10 o C/14 o F to 70 o C/158 o F, 70% RH maximum.
Approvals: Underwriter's Laboratory Listed, Laboratory Equipment, C/UL
United States/Canadian. E212550 (115VAC models only)
Compliance: UL Standard 61010-1, IEC 61010-1, 2nd Edition.
Weight (lbs) 19 lbs
Temperature Range Ambient + 2
o
C to 62
o
C Ambient + 3
o
C to 94
o C