LW Scientific USA Universal - Manual

Universal Centrifuge
Instruction Manual
The Universal Centrifuge from LW Scientific is the perfect solution for both laboratories and doctors’
offices. This newest member of our USA centrifuge initiative features a ZERO-RPM locking lid for safety
and digital programming of time ranging from 1-99 minutes and speed ranging from 500-3400rpm.
Achieve up to 1550g with the fixed-angle rotor or 1809g with the swing-out rotor, resulting in clean,
easy to read lines of separation. The LWS Universal centrifuge has a DC motor and comes with a
110-220v auto-switching power supply.
Maximum test-tube size for the 8-place fixed-angle rotor is 122mm tall and 17.5mm wide if spinning 8
tubes (full load), and 131mm tall and 17.5mm wide if spinning 4 tubes (every other position).
Maximum test-tube size for the 6-place swing-out rotor is 131mm tall and 17.5mm wide if spinning 6
tubes.
P. 770.270.1394 F. 770.270.2389 865 Marathon Parkway Lawrenceville GA 30046 P. 770.270.1394 F. 770.270.2389 865 Marathon Parkway Lawrenceville GA 30046
A Lid
B ON/OFF Switch
(DC Power Jack)
C Run Button
D Stop/Open Button
E Speed Setting
F Time Setting
G Emergency
Release Hole
H Lid Latch
A
B
C
D
E
F
G
H
Introduction