LW Scientific Mi5 Polarizer User Manual
Mi5 polarizer
A
Diopter Adjustment
B
Head
C
Light Port Slide
(trinoc only)
D
Head Retention Screw
E
Brightness Control
F
Fine Focus
G
On/Off Switch
(located on rear)
H
Coarse Focus
I
Focus Friction Control
(left side only)
J
Base Condenser
K
Substage Abbe Condenser
L
Substage Iris Diaphragm
M
Stage
N
Slide Holder
O
Objectives
P
Nosepiece
Q
Analyzer Module
R
Eyepieces
Model pictured:
Mi5 Polarizer
Mi5 Polarizer
B
I
D
G
H
F
E
A
J
K
L
M
N
O
P
R
Q
Remove all 3 small boxes from the lar
ge box and set on a firm work
area.
Open Box # 3 and take out microscope base. Set on table/bench. Car
efully remove all Styr
ofoam, zip ties from
stage (if applicable), and tissue paper and finally, any applicable stickers from stage. Next, pull out the (4) objectives
and the (2) eyepieces from the top Styr
ofoam container--set them on the table (these will be used in the microscope
assembly steps).
Open Box # 1 labeled: Binoc/Trinoc Head. Open the box and car
efully open plastic bag with the microscope head
in it and set it aside. Next, remove the eyepiece caps and tissue fr
om the bottom of the binoc/trinoc head.
Open Box #2 labeled: Analyzer Module and Accessories. Carefully r
emove items from foam/bubble wrap packaging
and set the analyzer module next to the microscope base and binoc/trinoc head. Y
ou should now have the basic 3
components to assemble your microscope.
P. 770.270.1394
F. 770.270.2389
865 Marathon Parkway Lawrenceville GA 30046