LW Scientific OmniVID - Manual (Page 13)

„ Press MENU button and then RIGHT button once to activate
the setting option
„ Press DOWN button seven times, it will display ‘Reset’
„ Press RIGHT button to go to the sub-menu
„ Use UP / DOWN buttons to choose to reset or not and press
OK to confirm
„ Press MENU button again to go back to ψCAMERAω mode
z Language ==== Setting the interface language
„ Press MENU button and then RIGHT button once to activate
the setting option
„ Press DOWN button eight times, it will display ‘Language’
„ Press RIGHT button to go to the sub-menu
„ Use UP / DOWN buttons to choose to choose the language
and press OK to confirm, there are seven languages to
choose
„ Press MENU button again to go back to ψCAMERAω mode
z Reset number ==== Resetting the image number
„ Press MENU button and then RIGHT button once to activate
the setting option
„ Press DOWN button nine times, it will display ‘Numbering’
„ Press RIGHT button to go to the sub-menu
„ Use UP / DOWN buttons to choose to reset the image
number or not and press OK to confirm
„ Press MENU button again to go back to ψCAMERAω mode
¾ Options in ψVideoωmode
¡ Video options
z Auxiliary cable ==== Enable/Disable the screen auxiliary cable
„ Press MENU button to activate the snapshot option
„ Press DOWN button once, it will display ‘Auxiliary cable’
„ Press RIGHT button to go to the sub-menu
„ Use UP / DOWN buttons to set the type of auxiliary cable
and press OK to confirm
„ Press MENU button again to go back to ψCAMERAω mode
z Video mode ==== choose the output format of the video
„ Press MENU button to activate the menu
„ Press DOWN button twice, it will display ‘Video mode’
12