LW Scientific OmniVID User Manual
Page 4
Do NOT clean the camera with volatile fluid such as alcohol
Only use dry soft clothes to clean the spots on camera lens or LCD.
Do NOT tough any optical components directly with fingers.
Rain or moisture could cause faults to the camera, only keep the
camera in dry place
Do NOT use the microscope outdoor in rainy or snowing weather
If anything that may cause danger to the camera, such as water,
enters inside the camera, switch off the power source immediately
and unplug all the cables connected to the camera.
It is recommended to use a hard drive in a computer to store the
recorded images other than the SD card in the camera.
Notices when using the LCD
z
To avoid scratching the LCD surface, keep the camera away
from sharp objects.
z
The LCD may display some unexpected black or red spots, this
is a normal phenomenon for an LCD, even it is manufactured
with advanced technologies.
z
The unexpected spots displayed on the LCD will not affect the
quality of the image stored in the memory card.
z
The deformation of the surface may cause malfunction of the
LCD, so do NOT press or bend the LCD.
3