LinPlug Octopus - Manual (Page 31)

Envelope Matrix
Envelopes are routed to modulation destinations using the Octopus'
Envelope Matrix module which is located on the middle-right of the
instrument's front panel.
The Envelope Matrix module is similar to the Oscillator Matrix module
described above, so that if you know how that module works you should
have no trouble with the Envelope Matrix module. Note that the Envelope
Matrix module works in conjunction with the Envelope Editor module so it's
important that you are familiar with both modules in order to get the most
out of the Envelope Matrix module.
The Octopus contains 32 envelopes arranged in 4 banks of 8 slots. At any
time, one or more of these envelopes acts as a modulation source. The
Envelope Editor displays the currently selected envelope.
The Envelope Matrix contains an array of nodes connecting Envelopes to
various destinations within the synthesizer. The envelopes are displayed as
a set of vertical slots on the left side of the module. Envelope destinations
are displayed horizontally across the bottom of the matrix. Note that the
generic envelope destination is set in the Envelope Editor module (see
above for more information about the Envelope Editor module), while the
actual destination is set in the Envelope Matrix module. 11 destinations are
available. These are: Oscillator 1 to Oscillator 8, Filter 1 and Filter 2, and
the Sampler.
Manual 29