LinPlug Octopus - Manual (Page 14)

Sampler
The Octopus' Sampler module is located in the upper-left corner of the
instrument's Front Panel. If the Sampler module is not visible (that is, the
Oscillator Matrix is currently being displayed) it can be accessed by clicking
on the Matrix/Sampler button located in the lower-right corner of the
module. This section of the manual describes the Sampler module. For
information about the Oscillator Matrix module please refer to its section in
this manual.
The Octopus' Sampler module functions as an audio sampler playing back
audio files when triggered.
Sampler Slots
The Sampler module consists of 8 sample slots located on the left of the
module. Each slot can contain one audio sample. When a slot is empty it is
deactivated. This is indicated by its dark colour and the absence of a
sample name in the slot's display.
Clicking on the "sample slot" opens the Load Sample dialog which enables
samples to be loaded into the currently selected slot. Once a sample is
loaded into a slot, its name is displayed. To the right of the sample's name
is the Delete button ( Trash icon). Clicking on this button removes the
sample from the selected slot.
Each sample slot has the following controls: Low Key, Root Key, KBD TRK
(Keyboard Tracking), USE LPS, F1/F2, PAN and MIX. These controls are
described below.
12 Manual