Linkskey LKV-IPM01 - Manual (Page 81)

KLE User Guide R1.2
Enable RADIUS Accounting : Check this option, if you want to enable RADIUS
accounting support on KLE.
Accounting Server : Here you should enter the IP address of the server that offers
RADIUS accounting service.
Port : Here you should specify the port that is used for Radius accounting. By default,
it is set to 1813.
Secondary Accounting Server (if any) : Here you should enter the IP address of the
secondary server, if you’ve got any backup RADIUS accounting server that offers
RADIUS accounting service.
RADIUS secret : Here you should specify the RADIUS secret, or Shared Secret,
between the RADIUS client (i.e. KLE) and the RADIUS server. Note that the RADIUS
secret, or the Shared Secret, is a shared text string that is used as a password
between the RADIUS client and RADIUS server.
Remote Authentication
By default, the Remote Authentication is configured at None – All remote
authentications are disabled. In this case, the authentication is all done locally using
the database on KLE only. However, if you have remote authentication supports –
such as a RADIUS server or LDAP server – available on your network environment,
You can then always have the choice to enable remote authentication on KLE, either
using RADIUS or LDAP authentication.
Enable Remote Authentication : You can select either None / LDAP / RADIUS support
from the drop down combo box.
None – Disable the Remote Authentication Support
- - 77