Linkskey LKV-IPM01 - Manual (Page 13)

KLE User Guide R1.2
KLE Rear View
KLE Rear Panel
PC/KVM port (HDB-15, integrated with PS/2 Keyboard and mouse signals)
The PC port connector is where you should connect to either a single PS/2 computer
or a single PS/2 KVM Switch, using the 3-in-1 slim KVM cables w/ an integrated
HDB15 connector. However, if you are using USB-enabled computer or USB KVM
Switch, you should additionally use a USB cable to connect to a USB port on your
computer for keyboard/mouse connection.
Monitor Port (HDB-15)
This is where you should plug in the Monitor for your local console on KLE.
USB port (USB Type B)
This USB port provides USB keyboard/mouse connections to a USB-enabled PC, or to
a USB KVM Switch. Thus, if you are connecting any USB-enabled PC or USB KVM
Switch, please use a USB cable to make the connection.
Ethernet Port (RJ-45)
The Ethernet port, or digital port, offers anytime anywhere access of KLE and
subsequently the conventional KVM Switch(es) and servers/computers connected
behind it to the remote login clients lover LAN/Internet.
Serial Control Port (RJ-12)
The serial control port allows you to connect to either an external modem or a power
control unit or to a cascaded chain of power control units. When added with an
external modem to its serial control port, KLE could serve either as a PPP server to
allow direct cable connection or dial-in connection from its peer computers, or as a
PPP client to dial-in to the ISP or an enterprise PPP server. Furthermore, through
serial commands sent over its serial control port, KLE can perform remote power
on/off and power cycling task via the (cascaded) power control module(s).
KLE Power Socket
You should use the DC9V 2A Adapter provided within the package. Use of any other
adapter will nullify the warranty.
- - 9