Linkskey LKV-IPM01 - Manual (Page 57)

KLE User Guide R1.2
4.6 Power Control – Miscellaneous Settings
for Video Servers
After any setting change, click the Submit button to save new setting to the KLE database, and then click
Apply Setting to apply new settings to KLE immediately.
Power Control
Enable the power control via the serial port : Check this option if you want to enable
the remote power control over KLE viewer interface.
Power Control device initialization-dialog (chat script style) : Specify a login script for
your power control device. However, if your power control device does not require a
login script, just leave blank the field for login script.
For the individual setting of the serial ASCII port commands that should be sent for Power ON / OFF
of each port, you should go to Computers page for configuration.
- - 53