Linkskey LKV-IPM01 - Manual (Page 73)

KLE User Guide R1.2
Gateway: Enter the correct IP for your gateway.
Primary DNS Server: Enter the primary DNS Server for KLE. This is a required
setting for the e-mail alerts function in KLE.
If you are hosting multiple KLE units within your networking environment and you want to allow
external internet access to these multiple KLE units by using only an external IP together with a set of
dedicated port numbers each for a different KLE unit ….. then, one usual practice is to configure a set of
virtual servers on your router so as to map each
external access_IP: port_number pair to an internal IP: port
number that is assigned to a specific KLE unit. Thus, you need only one external IP address to allow remote
clients to login multiple KLE units only by using different port number mappings.
Use DHCP :
Normally, it is NOT recommended to use the DHCP setting for KLE. However, if you have no choice
but to use DHCP as the only available source for KLE local IP, you can still have the choice to check the
option to enable it.
This option allows you to configure KLE as a DHCP client using the IP address
assigned by a DHCP server.
- - 69