Linkskey LKV-IPM01 - Manual (Page 58)

KLE User Guide R1.2
4.7 Computers – Miscellaneous Settings for
Video Servers
After any setting change, click the Submit button to save new setting to the KLE database, and then click
Apply Setting to apply new settings to KLE immediately.
Select the KVM Port Number : Select the target KVM port to which your target
computer is connected. You can just select from the drop down combo box for the
target port number to be designated with various port specific settings on this page,
such as computer name, the scanning and alarm options, power-on and power-off
commands.
You can use the drop-down combo box or use the Previous and the Next button to
select KVM port for setting.
Computer Name
Enter a character string (32 characters max) : Designate the computer name (in
this case, it is Redhat Linux) for the computer you will connect to that specific port
(in this case, it is port 6) on the conventional KVM Switch behind KLE. A Maximum
length of 32 characters for each name is allowed. The computer names you specify
here for each port will appear all together in the Select Computer Box when logging
in KLE Viewer.
Computer Scanning and Alarms
Do not include in scanning process : If you do not want any KVM port (in this case, it
is port 6) to be included in KLE auto-scanning, you should check this option to
exclude it.
- - 54