Yaskawa YASNAC PC NC I/O Signal Function Manual - Manual (Page 123)

2
YASNAC PCNC I/O Signal Function Manual Specifications
Feed
Machining feedrate
100m/min.,G01,tangential speed
constant control
Rapid traverse rate 240m/min.
F1 digit feed F1 to F9
Dwell G04
Feed per minute
Manual feed x1/x1/x100
Simultaneous 3-axis manual feed 3 manual pusle generators
Incremental feed x1/x1/x100/x1000/x10000/x100000
Automatic accel/decel
Feed: exponentail accel/decel
Rapid traverse: linear accel/decel
Rapid traverse rate override 100%, 50%, 25% F0
Extended rapid traverse rate override F1,F2
Feedrate override 0 to 200%, every 10% step
Extended machining feed override 0 to 540%
Feedrate override cancel OVR input
Solid tapping G93/G94 High-speed solid type
Deep hole solid tapping G184/G174
S-curve accel/decel At positioning
Corner speed specification (G107)
Part finishing (medium precision) with
automatic accel/decel function at the cor-
ner
Form error compensation
Form error compensation
for servo related delay
Automatic form error compensation (G-HSC)
Part finishing, accel/decel speed
before shift + form error compensation
High-speed machining (S-HSC)
Mold finishing, automatic corner accel/
decel
before shift + form error compensation
Variable P SET
Part Program
Storage and Edit
O9000 to O9999 edit/display/output interlock
Playback function Program edit by keying or external input
Directory display
Background edit Program edit during automatic operation